The XM200 road milling machines is mainly used for maintenance renovation of large-scale asphalt concrete pavement, fine cutting of cement road surface and surface layer milling, cement stabilized soil layer renovation. XM200 is a high efficient economic type milling machine.

1.The anti-torsion chassis is made of high strength material and steel plates, can resist deformation under various load and terrain conditions.

2.Four crawlers are independently driven by hydraulic motors. All speed regulation can be operated on the control console at both sides of the driver.

3.The power of diesel engine is transmitted through the clutch and power conveyor belt to the reducer of milling rotor, in order to provide the biggest milling power

4.The milling machine is equipped with a set of accurate automatic vertical control device to control the milling depth.

Item		Unit	XM200
Maximum milling width		mm	2000
Maximum milling depth		mm	320
Milling wheel	Tool spacing	mm	15
	Number of tools		162
	Milling wheel diameter (with tool)	mm	980
	Milling wheel maximum inclination	°	5
Diesel engines	Cooling method		Water cooling
	Model		DHP13
	Number of cylinders		6
	Rated power	kw	390
	Engine speed	rpm	2100
	Fuel consumption: full load	l/h	103
Speed/grade ability	Working speed	m/min	0-34
	Walking speed	km/h	0-5
	Theoretical Gradeability (Working Blocks)	%	60%
	Ground clearance		320
Weight / load	Shipping weight	kg	30000
Weight / load	Working weight	kg	34000
Track device	Front track	mm	1720×300×620
Track device	Rear crawler	mm	1720×300×620
Box volume	Fuel tank	L	1400
	Hydraulic tank	L	400
	Water tank	L	3400
	Electrical system	V	24
Conveyor belt device	Aggregate conveyor belt width	mm	800
	Discharging conveyor width	mm	800
	Conveyor belt conveying capacity	≤m3/h	330
Shipping dimensions	Machinery (length×width×height)	mm	7650×2580×3000
Shipping dimensions	Belt conveyor (length × width × height)	mm	8060×1150×1500