CDD20FSA Forklifts
1、Five fulcrum structure,the stability of the whole vehicle is more reliable.
2、The accumulator is used in the lifting power unit,the lifting is more stable.
3、Marking two descending speeds,better saving time.
4、The battery side pull structure is convenient to replace.
5、Large capacity lead-acid battery with strong endurance.
6、With floating AC drive,driving pressure compensation system,running smoothly.

Description	Unit	Parameter value
Model		CDD20FSA
Configuration No.		68
Mast type		2-Stage STD
Rated capacity	kg	2000
Load center distance	mm	600
Wheel base	mm	1400
Driving mode		Stand On
Tyre type(front/rear)		PU
Wheel quantity Driving wheel/Balance wheel/Bearing wheel		1/2/4
Standard lifting height	mm	3000
Max extend height	mm	3420
Mast lowered height	mm	2015
Lowered fork height	mm	90
Fork size(length/width/thickness)	mm	1150/185/60
Truck body length	mm	2120/2570
Truck body width	mm	850
Outside width between forks	mm	680
Inside width between forks	mm	310
Min.Turning radius	mm	1650/2100
Min.right angle stacking aisle width for pallets 800×1200	mm	2546/2996
Min.right angle stacking aisle width for   pallets 1000×1200	mm	2608/3058
Min.ground clearance	mm	30
Travelling speed,loaded/unloaded	km/h	4.32/5.4
Lifting speed,loaded/unloaded	mm/s	68.8/125
Lowering speed,loaded/unloaded	mm/s	300/83
Gradeability,loaded/unloaded	%	4/10
Drive motor	KW	1.5
Lifting motor	KW	3
Steering motor	KW	0.2
Battery voltage / capacity	V/Ah	24V/270Ah
Brake		Electromagnetic/Regenerative
Controller		Curtis
Battery weight	kg	240
Total weight(with battery)	kg	1400